Common defects of solid wood floor decoration in s

2022-07-22
  • Detail

Summer is often hot and dry, or there is too much rain and humidity, so it has never been considered a good season for home decoration. In fact, as long as we pay attention to some important matters in summer construction, we can also avoid quality problems

summer is often hot and dry, or there is too much rain and humidity, so it has never been considered a good season for home decoration. In fact, as long as we pay attention to some important matters in summer construction, we can also avoid quality problems. Here, Xiaobian has collected some common diseases in the use of solid wood flooring for you. Now let's find solutions to these problems

brand store: Square Decoration solid wood floor Kanghui solid wood floor

moth eaten: because of the bite of insects in the wood, piles of powder can often be seen on the surface of the floor, which is annoying. The reason is related to the selection of flooring materials. In order to prevent moths, first, choose the floor produced by the drying kiln spray steaming process. Although the price is relatively expensive, it has killed all the eggs in the wood; Second, carefully select the keel, and do not use those with insect eyes or bark

crack raking: some floors have been paved for several days, and there are large gaps between laths. This is mostly related to the high moisture content before floor laying, which shrinks due to indoor high temperature or air drying. Note that the moisture content of the floor before laying is within the range of 8%-13%, and oil it in time after laying

noise: because the quality of the floor is not high, people will find creaking noise when walking on it, which is very uncomfortable after hearing it. For this reason, attention should be paid to the firm connection between the keel and the ground, the floor and the keel, and the number and length of nails should be appropriate. At the same time, it is necessary to prevent the keel spacing from being too large or the moisture content from being too high, otherwise the drying shrinkage and loosening after laying will also cause certain impact

Hualian: using laths of the same tree species, there are also great differences in color. If the laying is improper, it is easy to show “ Hualian ”. When using varnish to lay the floor with natural color, especially the slats of tree species with great color difference, you should consider the selection and deployment of slats, so that the color of the floor changes from light to deep, or gradually changes from deep to shallow

bulge: some floors bulge due to moisture expansion after paving. This is mostly related to the environment around the floor, especially the foundation is too damp or the floor is flooded. In order to ensure that the floor does not bulge, we should pay attention to three points: first, when the civil engineering project is just completed, we cannot immediately lay solid wood floors; second, if the living room is in a humid environment, it is appropriate to lay anti floor; 3、 When laying, the moisture content of the floor shall not be less than 7.8%

link: choose composite flooring “ Four to four not ” Remind you

广州妇科医院

合肥牛皮癣医院

济南血管瘤医院

成都耳鼻喉医院

Copyright © 2011 JIN SHI